Safety Inspection Checklist - ABI Attachments WW500SFLABI Setup Manual

SAFETY INSPECTION CHECK LIST:
The following items should be inspected before use:
Check for Water leakage from tank, valves, piping, or hoses.
Check ratcheting valve rope for any damage
Check cradle straps to ensure they are tight and bolted in properly
Make sure vent cap is secured in place properly
Inspect hoses for any tears or damage to hoses or connectors
Inspect spray boom for any damage to boom or nozzles.
Check engine for fuel or oil leakage – if found refer to motor manufacturer manual
Check engine for fuel level and oil level before operating the motor. Refer to motor
manufacturer manual for running instructions
Inspect hand jack for any damage and ability to raise or lower the Water Trailer
Check tow receiver, safety chains, and hooks for any damage
Check wheels, and rims for damage. Check lugs or studs to ensure they are tight.
Check tires for proper air pressure. Refer to PSI rating on the tire for proper air
pressure
DOT models-­- Check to make sure the standard electrical connector is properly
connected, and free of damage.
DOT models – Check to make sure breakaway brake line is secured and free of
damage
DOT models – Ensure Running/Brake lights are working before driving on any public
road
DOT models – Ensure that reflectors are visible and not damaged
DOT models – Make sure fenders are not hitting the tires and are free of damage
DOT models – Make sure all hoses are properly secured before driving on any public
road
CAUTION: Correct any discovered defects before continuing use!
© 2018 Copyright ABI Attachments, INC 10