Gardeo GTDTAC51HP6TES-BS625 Original Instructions Manual page 85

Do not touch rotating
Refuel in a well
ventilated area with
the engine stopped.
Never use the mower unless all
guards or grassbox provided by
manufacturer are in position.
Stop the engine and disconnect the
spark plug wire and inspect mower if:
(a) The mower begins to vibrate
abnormally; or
(b) After striking a foreign object.
Repair any damage before
continuing further operation of the
mower.
Never modify the mower in any way.
Use only replacement parts made
and guaranteed by the original
manufacturer of your mower.
Keep all safety devices (guards and
switches) in place and working.
INSTRUCTIONS D'ENTRETIEN
IMPORTANT - Regular, careful
maintenance is essential for keeping
the safety level and original
performance of the machine
unchanged in time.
Keep all nuts, bolts and screws tight
to be sure the equipment is in safe
working condition.
Regular maintenance is essential for
safety and performance
WARNING
blade.
WARNING
Never store the equipment with fuel
in the tank inside a building where
fumes can reach an open flame ,a
spark or a source of extreme heat.
Allow the engine to cool before
storing in any enclosure.
To reduce the fire hazard, keep the
engine; exhaust silencer, battery
compartment and petrol storage area
free of grass, leaves, or excessive
grease. Do not leave containers
with grass cuttings in doors.
Replace worn or damaged parts for
safety. For reasons of safety, do not
use the equipment with worn or
damaged parts. Parts are to be
replaced and not repaired. Parts
that are not of the same quality can
damage the equipment and be
dangerous for your safety.
If the fuel tank has to be drained, this
should be done outdoors and when
the engine is cool.
Wear strong work gloves when
removing and reassembling the
blade.
Check the blade's balance after
sharpening.
Check the self-closing guard and
grass-catcher frequently for wear
and deterioration.
Whenever the machine is to be
handled, transported or tilted you
must:
wear strong working gloves;
grasp the machine at the points that
offer a safe grip, taking account of
the weight and its distribution.
85