PRODIS MD731 Instruction Manual page 12

Table of Contents

Advertisement

Available languages

Available languages

• Do not place the lamp in a position that would make it unsafe for young children in case of
accidental pulling on the power cord.
• Do not attempt to open the lamp to repair it. The electrical part can only be repaired by a
qualified electrician or a specialized workshop.
• Do not modify, open, disassemble, puncture or repair.
• Do not use if the plug or cable is damaged. All the repairs must be carried out by a qualified
technician.
• Never look directly at the light source.
• Do not cover the lamp when it is switched on.
• Handle the product with care. A blow, a shock, or a fall, even from a low height, can damage it.
• If you do not intend to use the lamp for a long time, remove the cable from the outlet.
• DO NOT drink the contents of the bottle.
CLEANING
Before cleaning the lamp, unplug it and allow it to cool down for 30 minutes.
Clean the lamp with a soft, dry, lint-free cloth.
If the glass bottle is very dirty, it can be cleaned with a cloth slightly moistened with glass cleaner.
Before cleaning, the lamp must be unplugged and cold.
Avoid contact with water.
Do not use abrasive chemicals or detergents.
Keep the lamp away from dust, moisture and extreme temperatures.
WARNING: You should not dispose of this device with your household waste. A selective
collection system for this type of product is implemented by your local authorities. Please
contact your local authorities to find out how and where collection takes place.These
restrictions apply because electrical and electronic devices contain dangerous substances that
have harmful effects on the environment or on human health and must be recycled.
This symbol indicates that electrical and electronic devices are collected selectively. The
symbol shows a waste container crossed out with an X symbol.
If the power cable is damaged, it must be replaced by the manufacturer, his after sales service,
or a person qualified in this area in order to avoid any accidents arising.
Imported by PRODIS SAS, 1 rue de Rome, 93110 Rosny-sous-Bois, France/ Made in PRC
Marketed by EUROTOPS VERSAND GMBH D-40764 LANGENFELD, Germany

Advertisement

Table of Contents
loading

Related Products for PRODIS MD731

This manual is also suitable for:

Km1037

Table of Contents