Lamp Operation; Precautions For Use - PRODIS MD731 Instruction Manual

WARNINGS
Before using the lamp, you should read the warnings below and follow them for an optimum
use of your lamp in safety.
Very important: This lamp is designed to operate at room temperature (20
to 25 ° C).
If it is placed in a draft or a very cold room, it will not work.
NEVER move the lamp when it is lit, otherwise it may irreversibly cloud the
liquid in the bottle. Wait till the lamp has cooled down before moving it.
Do not shake the lamp even when it is not lit.
Do not use the lamp if the bottle is cracked.
DO NOT open the bottle or add liquids or solids inside. The empty space
above the bottle is intended to allow the liquid to expand.
To ensure optimal lamp operation, it is recommended that you do not use
the lamp for more than 10 hours continuously.
Do not heat the lamp on a heat source (radiator, etc.) to precipitate the
creation of wax bubbles. Only the bulb can allow that.

LAMP OPERATION

7. Plug the lamp into the socket.
8. Turn on the lamp by lightly pressing the switch.
The lamp (base, glass and upper cone) becomes very hot when lit,
-
this is normal. NEVER touch the lamp when it is in operation or after
turning it off! Wait until the lamp has cooled down.
After lighting it up, it should be warmed up for one hour until it has
-
reached the optimum operating temperature.
9. Touch the switch again to turn the lamp off.

PRECAUTIONS FOR USE

• Use the lamp indoors only.
• Before connecting the lamp to the mains, check that the voltage indicated on the rating plate
matches that of your electrical installation.
• Never exceed the maximum wattage indicated for the bulb (max. 25W) and use a bulb
corresponding to the type indicated in Part A: Instructions for bulb type and bulb installation.
• Do not pull on the cord, but on the plug to disconnect the lamp.
• Do not touch the lamp and its base with wet hands.
• Do not touch the lamp when it is turned on because it can be very hot.
• Turn off and unplug the lamp and leave to cool down before cleaning or carrying out any
maintenance.
• Install the lamp away from moisture and away from flammable materials and heat sources.
• The lamp should be placed in a dry place, on a clean and stable surface.
• The lamp is not a toy. Keep the lamp out of the reach of children and pets.
• Do not leave the lamp unattended.