Haverland AsAp Instruction Manual page 19

7- Mosquito killer function
Before pressing the mosquito killer function, please check the insect waste tray is
installed properly. (FIG.1).
FIG.1
a) If the waste tray is not installed correctly (FIG.2), this function can not be
activated and 3 warning beeps will be heard.
b) Once the tray is installed correctly, press the Anti-mosquito button and after
1 minute, the function will be activated.
c) Ckeck the insect waste tray regulary to eliminate the possible remains.
IMPORTANT: TURN OFF THE UNIT BEFORE REMOVING THE TRAY.
8-COOL
a) Make sure that the water level is between MAX
and MIN (FIG.3).
b) Press the COOL button. The cold indicator light
comes on and the unit will start pumping water
dissipating the air into the room.
REMOTE CONTROL
a) Before using the remote control, remove the
plastic protector from the battery.
b) The control functions works the same as the
control panel.
OPERATING MODES
- 6 -
FIG.2
FIG.3