Table of Contents
Advertisement
EN
Installing the AS3000 AS3X Flight Stabilization Module
Bind the PowerSafe Receiver
1.
Bind the Forward Programming enabled PowerSafe Receiver to a
Forward Programming enabled transmitter. See the receiver manual for
binding instructions.
2.
Fly and trim the aircraft before proceeding.
Installation
1.
Solidly mount the AS3000 on a smooth flat surface in the aircraft. The
module must be mounted flat and in line with the nose/tail. There are 8
orientation options available.
2.
Connect the cable from the Sensor port on the receiver to the port on the
rear of the AS3000.
IMPORTANT: Update your Spektrum transmitter with the latest Spektrum
AirWare™ software to take advantage of Forward Programming.
See the transmitter manual for updating instructions.
1
5
4
2
3
6
7
4
8
IMPORTANT: Do not
mount the sensor
perpendicular to the
flight path.
Advertisement
Table of Contents
