Safety Advice; Intended Use; Regulations / Certificates - Viega Fonterra Smart Control Instructions For Use Manual

2.2

Safety advice

2.3

Intended use

2.4

Regulations / certificates

Fonterra Smart Control
DANGER!
Danger due to electrical current
An electric shock can lead to burns and serious injury and
even death.
– Work on the electrics may only be carried out by trained
electricians.
– Switch off the mains voltage before carrying out work on
electrical parts.
NOTICE!
All cable connections must be made via plug connections,
their form should make them non-interchangeable.
The connection cables may not be extended.
The total length of the connection cable must not exceed
10 m.
Fonterra Smart Control is an electronic single room regulation for
radiant heating and cooling systems with one or several manifolds. In
connection with radiant heating and cooling systems, the system can be
used within a control range of 5–30 °C also for cooling purposes. The
function is guaranteed for the combination with Fonterra manifolds
DN25.
Manifolds by other manufacturers are compatible if they comply with
the following specification:
Threaded connection with euro cone and valve inserts –
n
M30 x 1.5 mm
Valve inserts – stroke 3.2 mm / resulting dimension 11.8 mm
n
Manifold outlets – minimum distance 45 mm
n
Use with electronic components by other manufacturers is not per‐
mitted.
All components have a CE mark and comply with the applicable regula‐
tions, see Ä „Regulations from section: Regulations / Certificates"
on page 7.
Product information
8 from 115