Mounting The Room Thermostat - Viega Fonterra Smart Control Instructions For Use Manual

3.3.6

Mounting the room thermostat

Using the mounting frame
Fonterra Smart Control
Mounting preparation
Before starting to mount, choose the final installation location. The fol‐
lowing criteria are decisive:
Stable radio connection to the basic unit has been established.
n
Ä „Checking the radio connection" on page 57
For removal, the installation site is accessible with 50 mm free space
n
from all sides.
Ä „Unlocking the mounting frame" on page 50
The installation site is located in the area of the room where an
n
agreeable room temperature is particularly important, such as play
area, workplace, lounge suite, dining area.
The casings of room thermostats and radio amplifiers are of identical
design. After fastening the mounting frame to the wall or a concealed
socket, the casings are placed on the frame and held in place by two
tabs which snap home.
When mounting the mounting frame on a concealed socket or uneven
underground, reinforce it by sticking on the metal plate comprised in the
delivery.
1 - Adhesive film
2 - Metal plate
Pull off the adhesive film and stick the metal plate to the mounting
frame – make sure the screw holes overlap.
1
2
Handling
46 from 115