Truncate - Monroe 8130X User Manual

Truncate (round down)
SWITCH SETTINGS
ENTER
E
E
1.444
1.444
2.687
2.687
60
DEPRESS PRINT OPERATIONAL NOTES
Truncate or Round Down
instructs the calculator
to ignore all values past
1.444C+ the decimal setting when
calculating a result or finding
1.444C+
2.687 + a total. Were this example
performed with the decimal
2.687 +
4.13 selector at F, the total would
be 4.136. With truncate, the
4.13
decimal digit 6 is ignored or
truncated. Note: Truncate
does not ignore decimal digits
entered (1.444 for example). It
Special Note: The default
Special Note: The default
position for the 8130 X / 8145X position for the 8125 is
automatic rounding commonly
is automatic rounding commonly
referred to as 5/4. In the default
position, any decimal digit past
position, any decimal digit past
the decimal setting is reviewed.
the decimal setting is reviewed.
If it is 5 or greater the decimal
If it is 5 or greater the decimal
digit to its left is rounded up. If
digit to its left is rounded up. If
it is 4 or less, the decimal digit
it is 4 or less, the decimal digit
to the left is unaffected.
to the left is unaffected.
51