URBANGLIDE URBANRIDE 55 User Manual page 8

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
REPLACING THE FRONT WHEEL
Remove the front wheel axle
by twisting counterclockwise
2pcs 5mm hex keys.
Do not store the battery in an environment above 25ºC or below 0ºC.
This scooter contains sealed lead-acid batteries, which shall be recycled in accordance with your local laws and
regulations. Please read and understand the following instructions on disposal of the batteries.
Disposal
: This product contains sealed lead-acid batteries, which must be disposed of in an environmentally
sound manner. Do not dispose of a lead-acid battery in tire. The battery may explode or leak. Do not dispose of a
lead-acid battery in your regular household trash. The incineration, land filling or mixing of sealed lead-acid batteries
with household trash is prohibited by law in most areas. Return exhausted batteries to a local, approved lead-acid
battery recycler ora local seller of automotive batteries.
Charger
: The charger supplied with the scooter should be regularly examined far damage to the cord, plug,
enclosure and other parts, and in the events of such damage the scooter must not be charged until the charger
has been repaired or replaced.
Wheels
: Wear and tear is unavoidable in the wheels and the driving system in the course of operation. This is
not a product fault. The user shall check regularly the wheels and the driving system for wearing and make
adjustment or replacement when necessary.
WARNING
: lf a battery leak occurs, avoid contact with the leaking acid and place the damaged battery in a
plastic bag. Refer to the disposal instructions above. lf acid comes into contact with skin or eyes, wash with cool
water for at least 15 minutes and contact a doctor.
Take note of the location of the
parts on the front wheel and make
sure all these parts are in their
correct position when re-mounted.
(The front wheel is removed in a
similar way to the way the rear
wheel is removed.)
REPAIR AND SERVICES
Tighten the front wheel axle by
twisting clockwise 2pcs 5mm hex
keys.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents