Before First Use; Inserting The Batteries; Am/Fm Reception; Operation With The Power Adaptor - Westfalia WM 2428 Instruction Manual

Before first Use

Remove the device from the packaging. Keep packaging material out of reach of
small children. There is risk of suffocation!

Inserting the Batteries

1. The battery compartment (8) is located at the back of the radio. Loosen the
screw on the battery compartment lid and take it off.
2. Insert 4 batteries of type 1.5 V LR14 C observing the right polarity. You will
find the polarity symbols in the battery compartment.
3. Reattach the battery compartment cover and tighten the screw.
4. Decreasing volume and poor reception normally indicate deteriorating
batteries. Replace the batteries or use a suitable power adaptor.
5. If you do not intend to use the radio for some time, remove the batteries.

AM/FM Reception

1. Set the ON/OFF switch (9) to the desired frequency band; either to AM or to
FM.
2. Set the tuning knob to the desired frequency. For the FM range use the
megahertz scale and for the AM range use the kilohertz scale.
3. Set the volume knob (1) to the desired volume.
4. To turn the radio off set the ON/OFF switch (9) to OFF.

Operation with the Power Adaptor

1. If you want to operate the radio by using the power adaptor, use a 6 V DC
power adaptor with an output current of at least 500 mA. The plug must be
equipped with a central positive pole.
2. A suitable power adaptor is available from Westfalia under the article number
11 76 22.
3. On the right side of the housing there is the power socket (7) sealed up by a
rubber covering. The batteries are disconnected when the plug is inserted
and the radio is powered from the power adaptor.
4. Please keep in mind that the radio is not splash proof while a plug is inserted
into the socket and the rubber cover is open. Water may enter through the
socket, and additionally most power adaptors are only intended to be used
indoors.
Operation
6