Subscribe to Our Youtube Channel
Related Manuals for Actidata Ti-NAS RT-6
Summary of Contents for Actidata Ti-NAS RT-6
- Page 1 Quick Start Guide Getting started with the actidata Ti-NAS RT-6, RT-7, RT-8 QSG_actidata_tinas-rt-english _Ver_01...
-
Page 2: Table Of Contents
6. All warranty disclaims in case of wrong mounting, wrong connecting, wrong operation, or any use where the system is not built for. 7. Please take care of backups. actidata Storage Systems GmbH assumes no liability for data loss. Service-Registration: Each system is supplied with a service certificate. -
Page 3: Overview: Panel & Connections
2. Overview: Panel and Connections The control elements of the actidata Ti-NAS RT-6, RT-7, RT-8 are shown below. Depending on the configuration, the actidata Ti-NAS system is equipped with a LTO-drive and HDDs, SSDs of different capacity and number. On the front you can find the following elements and displays:... - Page 4 • Alarm Mute Button (for Power Supply) SFP+ Transceiver: SFP+ Transceivers are not part of the scope of delivery. It is recommended to use certified SFP+ Transceivers which are compatible to your LAN switch. actidata Storage Systems GmbH – D-44149 Dortmund – Wulfshofstr. 16...
-
Page 5: Rack Installation
5. Move the pre-assembled chassis with the inner elements onto the outer elements in the rack. The safety lever has to be hold during the insertion of the Ti-NAS RT. 6. Secure the server with two screws at the front. actidata Storage Systems GmbH – D-44149 Dortmund – Wulfshofstr. 16... -
Page 6: Getting Started
4. Getting started After you have got an overview of the control panel and interfaces of the actidata Ti-NAS RT, the system can be started. After pushing the power-on button at the front, the actidata system starts the boot routines. Now you can connect via RDP (Remote Desktop). The access data, the defined network IPs can be found in the enclosed document „Important Information“, the... -
Page 7: Access To Bios And Ipmi
Power-On the NAS by remote as well. You can also download the IPMI- logs, by clicking the Button „Save Event Logs“. Please change the password of the IPMI after the first access. actidata Storage Systems GmbH – D-44149 Dortmund – Wulfshofstr. 16... -
Page 8: Monitoring / Disable Alarm
Notification, E-Mail, SNMP Warning Disable Power Supply Alarm by pressing the Alarm Mute Button on the backside. Disable RAID-Alarm in the MegaRAID Storage Manager. Select „Silence Alarm“ on the Dashboard. actidata Storage Systems GmbH – D-44149 Dortmund – Wulfshofstr. 16... -
Page 9: Further Information
When installing HDDs / SSDs, which are not qualified by the manufacturer, the function may be restricted and / or malfunctions may occur that are not covered by the warranty services of actidata Storage Systems GmbH. The system guarantee is void in the event of improper installation or installation / configuration of third-party components. - Page 10 Storage Systems GmbH – D-44149 Dortmund – Wulfshofstr. 16...
- Page 11 Storage Systems GmbH – D-44149 Dortmund – Wulfshofstr. 16...
- Page 12 I: www.actidata.com All right reserved actidata Storage Systems reserved all rights on this document. Any copy in print or electronical way or use outside the described use are forbidden. Changes will be done without any notice. No liability in case of any mistake or error in this document.
Need help?
Do you have a question about the Ti-NAS RT-6 and is the answer not in the manual?
Questions and answers