Sealey AP6601 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard these products will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCTS CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH THEY ARE INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and

general workshop practice regulations are adhered to when
using these units.
Locate the units in a suitable work area.

Keep the work area clean, uncluttered and ensure there is

adequate lighting.
WARNING! Use the Rollcab on level and solid ground,

preferably concrete.
Keep the units clean and tidy in accordance with good

workshop practice.
Keep children and unauthorised persons away from the work

area.
DO NOT use these units for any purpose other than that

for which they are designed.
DO NOT use the units outdoors.

DO NOT place the units in a damp or wet location or an

area where there is condensation.
DO NOT clean the units with any solvents which may

damage the surfaces or the protective coating.
 DO NOT move the units with the drawers out. To avoid
tipping, open one drawer at a time and close and secure all
drawers whilst moving the rollcab.
 DO NOT step on the drawers.
 DO NOT overload the drawers, weight limit per drawer is
36kg.
2. INTRODUCTION
• All heavy gauged steel construction and manufactured with
steel inner walls for extra strength and durability.
• Heavy-duty 45mm ball bearing drawer runners provide superior
performance and carry heavier loads.
• Full height rear locking mechanism, locks full-length drawers in
multiple locations.
• Added security provided by tumbler locks, supplied with two
folding keys.
• Rust and solvent resistant powder coat paint finish.
• The rollcab is fitted with six Ø125mm plastic wheels, two fixed
and four castors, two of which are lockable.
• Topchest features heavy-duty side handles.
• Rollcab features a high polished chrome handle for comfort
and control when manoeuvring.
• Rollcab supplied with a 10mm thick top mat to protect top
surface from scratching.
• Drawers feature stylish aluminium drawer pulls and non-slip
liners.
3. SPECIFICATION
Model No.
Overall Size W x D x H (mm):
Full Width Large Drawer (mm):
Small Drawer (mm):
Large Drawer (mm):
Small ½ Drawer (mm):
X-Large ½ Drawer (mm):
Max. weight per wheel set:
© Jack Sealey Limited
AP6612
1684 x 466 x 985
1570 x 405 x 105 (x1)
1200 x 405 x 50 (x5)
1200 x 405 x 130 (x1)
325 x 405 x 50 (x4)
325 x 405 x 235 (x1)
900kg
Original Language Version
INSTRUCTIONS FOR:
ADD-ON CHEST/TOPCHEST/ROLLCAB -
HEAVY DUTY - RED
AP6601/6610/6612
:
MODEL No's
AP6610
1656 x 435 x 495
1200 x 405 x 130 (x1)
1200 x 405 x 50 (x4)
-
325 x 405 x 50 (x4)
325 x 405 x 130 (x1)
AP6601, 6610, 6612 Issue: 1 - 30/11/12
AP6601
AP6610
AP6612
AP6601
1664 x 440 x 170
1570 x 405 x 105 (x1)
-
-
-
-