Table of Contents
Advertisement
MIXER SHAFT ASSEMBLY
1. PLACE THE KEY (ITEM 5) ON THE
MIXER SHAFT AND SLIDE THE MIXER
SHAFT INTO THE HOLLOW OUTPUT
SHAFT ON THE GEARDRIVE (ITEM 1).
2. PLACE THE THRUST WASHER (ITEM 6)
OVER THE HOLLOW OUTPUT SHAFT ON
THE TOP OF THE GEARDRIVE. APPLY
THREADLOCKER TO THE THREADS OF
THE HEX HEAD CAP SCREW (ITEM 3),
INSTALL IT THRU THE THRUST WASHER
AND INTO THE MIXER SHAFT. TORQUE
THE GRADE 5 HEX HEAD CAP SCREW
TO THE RECOMMENDED VALUE IN THE
O&M MANUAL.
3. ATTACH THE GUARD (ITEM 2) ON
THE TOP OF THE GEARDRIVE.
ALTERNATE SHAFT CONSTRUCTION:
ATTACH THE SHAFT COLLAR (ITEM 7)
TO THE MIXER SHAFT (ITEM 4) BEFORE
STEP 1.
* QUANTITY VARIES DEPENDING
ON SHAFT DESIGN.
* ALL DIMENSIONS AND WEIGHTS ARE FOR REFERENCE ONLY
UNLESS THE DRAWING IS CERTIFIED.
* ALL EQUIPMENT DESIGN AND APPLICATION DATA SHOWN
HEREIN IS CONFIDENTIAL AND THE PROPERTY OF BRAWN MIXER.
NO USE OR DISCLOSURE THEREOF MAY BE MADE WITHOUT OUR
WRITTEN PERMISSION.
BSB
DRAWN BY:
DATE:
APPROVED BY:
CONSTRUCTION
12838 Stainless Drive
©
2018
10/29/2018
DATE:
1
7
ALTERNATE
OF SHAFT
Holland, MI 49424
DWG.
PH: 616-399-5600
FAX: 616-399-3084
NO.
*FOR REFERENCE ONLY*
MIXER MODEL
BTR SHAFT ASSEMBLY
DIMENSION AND ASSEMBLY DRAWING
A-
TK0192
2
3
6
5
4
REV.
Advertisement
Table of Contents
