NBE BRAWN MIXER BTR 1 Series Operation And Maintenance Manual page 28

4 Repair
This product is a precision sealing device. The design and dimension tolerances are critical
to seal performance. Only parts supplied by Flowserve should be used to repair a seal.
These are available from numerous Flowserve stocking locations. To order replacement
parts, refer to the part code number and B/M number. A spare backup seal should be
stocked to reduce repair time.
When repairs are not conducted at the customer's location, decontaminate the seal
assembly and return it to Flowserve, with an order marked "Repair or Replace". A signed
certificate of decontamination must be attached. A Material Safety Data Sheet (MSDS)
must be enclosed for any product that came in contact with the seal. The seal assembly
will be inspected and, if repairable, it will be rebuilt, tested, and returned in its original
condition.
FIS131eng 11/07 Printed in USA
To find your local Flowserve representative
and find out more about Flowserve Corporation,
visit www.flowserve.com
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When
properly selected, this Flowserve product is designed to perform its intended function safely during its useful life.
However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used
in numerous applications under a wide variety of industrial service conditions. Although Flowserve can provide
general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user
must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and
maintenance of Flowserve products. The purchaser/user should read and understand the Installation Instructions
included with the product, and train its employees and contractors in the safe use of Flowserve products in connection
with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are supplied for
informative purposes only and should not be considered certified or as a guarantee of satisfactory results by reliance
thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any
matter with respect to this product. Because Flowserve is continually improving and upgrading its product design,
the specifications, dimensions and information contained herein are subject to change without notice. Should any
question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of
its worldwide operations or offices.
© Copyright 2007 Flowserve Corporation
flowserve.com
TO REORDER REFER TO
B/M #
.
F.O
USA and Canada
Kalamazoo, Michigan USA
Telephone: 1 269 381 2650
Telefax: 1 269 382 8726
Europe, Middle East, Africa
Essen, Germany
Telephone: 49 201 3937-0
Telefax: 49 201 2200-561
Asia Pacific
Singapore
Telephone: 65 6544 6800
Telefax: 65 6214 0541
Latin America
Mexico City
Telephone: 52 55 5567 7170
Telefax: 52 55 5567 4224