Summary of Contents for Rompa TheraGym Over the Moon Swing Set B
Page 1
1. Product Name TheraGym® Over the Moon Swing Set B 2. Product Code 21583 3. Colour As shown 4. Brief Description Provide many opportunities to experience multi-sensory input. Each set includes a half moon-shaped support made of strong Baltic birch wood, a heavy-duty bar strap and several options to secure these to your suspension system.
Page 2
6. Snoezelen® Stimulations Vestibular 7. Best Use Use from a safe and appropriate suspension system. 8. Compatible ROMPA® Products 21928 – Hanging Bracket 21559 – Safety Rotational Device 23011 (21570, 21590) – Safety Snap www.rompa.com for mats and a large range of Sensory Integration products 9.
10. Detailed Description Over the Moon Set B Provide many opportunities to experience multi-sensory input. Each set includes a half moon-shaped support made of strong Baltic birch wood, a heavy-duty bar strap and several options to secure these to your suspension system. Working load: 136kg (300 lbs). Set B includes an 81cm Trapeze Bar and a set of 2 Acrobat Rings (either can be attached to the half-moon-shaped support with 91cm reinforced nylon straps) and 2 Safety Snaps to attach the straps to the wooden support.
13. Installation Allow plenty of unobstructed space around your swing. Suspended equipment needs a minimum ceiling height of 2.5m (8 feet). Suspended equipment should be positioned a clear distance of 1.8m (6 feet) from walls and obstacles. Pinch together one section of the green bar strap and thread it through the centre hole at the top of the half-moon bar.
Page 5
Hook the Safety Snaps from the swing or accessory you wish to attach to the holes on each opposite end of the half-moon bar. To attach the Acrobat Rings to the straps, thread one end of the strap through the Acrobat Ring.
Page 6
Pull tight so that the threaded loop secures the ring on one end. Attach the open loop end of the strap with a Safety Snap to the half-moon bar at one of the end holes. To attach the Trapeze Bar, open the loop on one end of the strap and slide it on to one end of the Trapeze Bar, sliding it towards the middle of the bar just past the hole at the bar’s end.
Page 7
Pull the strap all the way through the hole in the bar and then slide the threaded loop to the outside of the bar so that it touches, but can’t go past, the hanging strap. Pull the hanging strap straight and attach to the half-moon bar with a Safety Snap. Repeat for the other strap on the other side of the bar.
Page 8
Safety Snap Heavy-duty green bar strap [Grab your reader’s attention with a great quote from the Half-moon wood bar document or use this space to emphasize a key point. To place this text box anywhere on the page, just drag it.] Reinforced nylon rope Acrobat Ring...
15. Troubleshooting Not applicable Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received – please contact us at producthelp@rompa.com...
Page 10
SENSORY INTEGRATION MAINTENANCE CHECK LIST PRODUCT: ………………………………………………. TO CHECK Date / S (Satisfactory) or R (Repair/replace)
Need help?
Do you have a question about the TheraGym Over the Moon Swing Set B and is the answer not in the manual?
Questions and answers