Table of Contents
Related Manuals for Rompa 21602
Summary of Contents for Rompa 21602
- Page 1 1. Product Name Scooter Board Attachment 2. Product Code 21602 3. Colour Natural wood finish 4. Brief Description Simply hooks onto the ladder bars of the Climb and Go – Set of 2 (21554) for a scooter board ramp or a wooden slide.
- Page 2 For use by a suitably qualified professional, in a safely-located and appropriate place. For indoor use only. 8. Compatible ROMPA® Products Please visit www.rompa.com for details about our full range, including wall and floor cushions. 21554 Climb and Go – Set of 2 ...
- Page 3 9. Starting Up There are no short-cuts to setting up Sensory Integration products. Read all instructions thoroughly before installing and using the Scooter Ramp Attachment and keep the instructions in a safe place. 10. Detailed Description Simply hooks onto the ladder bars of the Climb and Go – Set of 2 (21554) for a scooter board ramp or a wooden slide.
- Page 4 13. Installation Please check equipment immediately for any damage that may have resulted during shipping. If any damage has occurred, please contact ROMPA® immediately. Attach the top platform piece to the slide ramp piece. You will need a 4mm (5/32”) allen key (not included) to tighten your screw sets.
- Page 5 15. Troubleshooting Not applicable Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received – please contact us at producthelp@rompa.com...
- Page 6 SENSORY INTEGRATION MAINTENANCE CHECK LIST PRODUCT: ………………………………………………. TO CHECK Date / S (Satisfactory) or R (Repair/replace)
Need help?
Do you have a question about the 21602 and is the answer not in the manual?
Questions and answers