Advertisement
6
English
TO REMOVE/REPLACE EARCUPS
To remove earcup, reach in next to chinstrap base and grasp base of
earcup on one side, pull toward you until a snap is heard, then do the
other side of the same earcup.
When both sides are free, pull lower part of cup inward and down to
release lower tab. Repeat for the other side.
In case you wash the earcups, put them into lukewarm water with small
amount of laundry soap and wash gently by hand. Rinse well with fresh
water and wipe off with a soft cloth. Dry them in the shade at ambient
temperature.
WARNING: Never use petrol, thinner, benzene or any other solvents
as these can adversely affect the shock absorbing liner and plastic
components.
To replace earcup (note that the L & R embossed on the cup bases
indicate the side of the head the cup is on when the helmet is worn), slide
the lower tab into its receptacle and push home.
Then, ensuring that the strap is in the correct position, place the two top
tabs over their receptacles and push them home until a snap is heard from
each. Now work the strap fully into position. Repeat for the other side.
Advertisement
Chapters
