Manage System - Control/Emulate Options - AMX NI-2000 Programming Manual

Manage System - Control/Emulate Options

Click the Control/Emulate link (in the Manage System tab) to access the Control/Emulate Options page
(FIG. 30). The options on this page allow you to Control or Emulate a device connected to this Master.
Device Control/Emulation is accomplished by manipulating a target device's channels, levels, and
sending both send commands and strings to the device.
FIG. 30 Manage System (Control/Emulate)
The System Number, Device Number, and Port Number fields are read-only. Instead
of specifying these values for a System Device, select a device via the Device Tree to
populate these fields with that device's information.
NI Series WebConsole & Programming Guide
To Control a device means that the program generates messages which appear to a specified
device to have come from the Master.
To Emulate a device means that the program generates messages which appear to the Master
to have come from a specified device (physical or virtual). When Emulate is selected, a Push
button is added to the Channel Code section (see FIG. 30).
WebConsole - System Options
Push button only displayed if
Emulate is selected
45