Atwood Round-O-Matic R-900C Series Operation And Safety Manual page 4

A.M. MFG. CO.
DIV. OF ATWOOD CORP.
©2007
OPERATIONS AND SAFETY MANUAL
READ AND FAMILIARIZE YOURSELF WITH THIS MANUAL BEFORE OPERATING THIS MACHINE
YOUR R900 ROUND - O - MATIC DOUGH ROUNDER HAS BEEN BUILT WITH THE BUSY BAKER IN MIND.
IT'S VERSATILITY AND SIMPLICITY ARE UNMATCHED IN THE INDUSTRY. PRODUCTION DEPENDS ON
THE DESIRED DOUGH BALL SIZE AND HOW FAST THE DIVIDED DOUGH PIECES ARE DROPPED INTO
THE FUNNEL. SMALL PIECES CAN BE FED APPROXIMATELY TWO PER SECOND, WHEREAS LARGER
DOUGH PIECES (UP TO 2 lbs.) MUST BE FED AT A LESSER RATE. GETTING THE FEEL OF THE MACHINE
WILL BEST DETERMINE JUST WHAT THE FEED RATE SHOULD BE FOR ANY CERTAIN DOUGH BALL
SIZE. NO ADJUSTMENTS ARE NECESSARY WHEN CHANGING THE SIZE OF YOUR DOUGH PIECE, IT
WILL AUTOMATICALLY BE ROUNDED INTO A TIGHT, SMOOTH BALL, WITH NO MORE EFFORT THAN IT
TAKES TO DROP THEM INTO THE FUNNEL.
CAUTION:
ALL OPERATORS MUST BE FULLY TRAINED AND INSTRUCTED IN SAFETY PROCEDURES
BEFORE BEGINNING PRODUCTION.
R900-C
CONVEYOR LENGTH
CONVEYOR BELT
OVERALL HEIGHT
MACHINE WIDTH
HEIGHT UNDER CONVEYOR
VOLTAGE (STANDARD)
VOLTAGE (OPTIONAL)
AMPERAGE
PRODUCTION RANGE
PRODUCTION RATE
SHIPPING WEIGHT
INSTALLATION INSTRUCTIONS
LOCATION:
SELECT LOCATION CAREFULLY. THE AREA SHOULD PROVIDE THE OPERATOR WITH ENOUGH SPACE
TO USE THE EQUIPMENT IN A SAFE MANNER. THE FLOOR AREA SELECTED SHOULD BE A FLAT
SURFACE AND EASY TO CLEAN AND SHOULD BE FREE OF OIL, GREASE, ECT. AVOID AREAS WHERE
BYSTANDERS AND CUSTOMERS MAY BE PRESENT.
CAUTION
PROPER UNIT INSTALLATION IS NECESSARY FOR SAFE AND EFFICIENT OPERATION. PROPER
INSTALLATION ALSO HELPS PROTECT THE UNIT FROM DAMAGE AND MAKES SERVICE EASIER.
R900_IT
INCLUDING PARTS CATALOG
FOLLOW INSTRUCTIONS DURING USE
INTRODUCTION
SPECIFICATIONS
18 1/2" FROM FRONT OF MACHINE.
(23" OVERALL LENGTH)
2 PLY PVC
115 VOLT SINGLE PHASE
208/220 (3) PHASE
15 AMPS.
1 oz. TO 2 1/2 lbs.
UP TO 7200 PIECES PER HOUR
350 lbs.
R900-T
TABLE DIAMETER
MACHINE WIDTH
OVERALL HEIGHT
42 1/2"
HEIGHT UNDER TABLE
24"
VOLTAGE (STANDARD)
32 3/4"
VOLTAGE (OPTIONAL)
AMPERAGE
PRODUCTION RANGE
PRODUCTION RATE
SHIPPING WEIGHT
I
MODEL:
R-900
35 1/2"
42 1/2"
36 1/4"
115 VOLT SINGLE PHASE
208/220 (3) PHASE
15 AMPS.
1 oz. TO 2 1/2 lbs.
UP TO 7200 PIECES PER HOUR
350 lbs.
1/01
24"