Atwood Round-O-Matic R-900C Series Operation And Safety Manual page 2

A.M. MFG. CO.
DIV. OF ATWOOD CORP.
© 2001
OWNERS RESPONSIBILITY
NOTE:
THE PARTS AND EQUIPMENT DESCRIBED IN THIS MANUAL MAY BE COVERED BY ONE OR MORE U.S.
AND FOREIGN PENDING PATENTS.
TO MAINTAIN MACHINE AND USER SAFETY, THE RESPONSIBILITY OF THE
OWNER IS TO READ AND FOLLOW THESE INSTRUCTIONS AND TO ENSURE
THAT ALL OPERATORS UNDERSTAND AND FOLLOW THESE AND OTHER
SAFETY INSTRUCTIONS IN THIS MANUAL.
• FOLLOW ALL INSTALLATION INSTRUCTIONS.
• MAKE SURE INSTALLATION CONFORMS TO ALL APPLICABLE LOCAL, STATE,
AND FEDERAL CODES, RULES AND REGULATIONS SUCH AS STATE AND
FEDERAL OSHA REGULATIONS AND ELECTRICAL CODES.
• CAREFULLY CHECK THE UNIT FOR CORRECT INITIAL FUNCTION.
• READ AND FOLLOW THE SAFETY INSTRUCTIONS. KEEP THEM READILY
AVAILABLE FOR MACHINE OPERATORS.
• MAKE CERTAIN ALL OPERATORS ARE PROPERLY TRAINED, KNOW HOW TO
SAFELY AND CORRECTLY OPERATE THE UNIT AND ARE PROPERLY
SUPERVISED.
• ALLOW UNIT OPERATION ONLY WITH ALL PARTS INCLUDING SAFETY
EQUIPMENT, IN PLACE AND OPERATING SAFELY.
• CAREFULLY INSPECT THE UNIT ON A REGULAR BASIS AND PERFORM ALL
MAINTENANCE AS REQUIRED.
• SERVICE AND MAINTAIN THE UNIT ONLY WITH AUTHORIZED OR APPROVED
REPLACEMENT PARTS.
•
KEEP ALL INSTRUCTIONS PERMANENTLY WITH THE UNIT ALONG WITH ALL
DECALS AND WARNING LABELS ON THE UNIT CLEAN AND VISIBLE.
R900_I
MASTER
!
I
MODEL:
R-900
12/07