Related Manuals for Ikan PT4200-P2P
Summary of Contents for Ikan PT4200-P2P
- Page 1 Quick Start Guide PT4200-P2P Ikan P2P Interview System with 2 x 12” Teleprompters What’s Included 2 x PT4200 2 x 25 ft HDMI Cable because we’re filmmakers too www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com...
- Page 2 Overview When using the Ikan’s P2P Interview System, the interviewer and the interviewee are able to look directly into the camera lens while still seeing and looking directly at an image of each other. This equates to a natural one-on-one interview style which is also, because of the direct eye contact, much more involving for the audience.
- Page 3 Step 5 Step 6 After tightening the rods, slide the monitor into the teleprompter base. Pull the red knob to insert the teleprompter bracket with glass into the Leave slight room for the teleprompter bracket and glass to slide in. teleprompter base.
- Page 4 Step 9 Step 10 Attach the magnetic teleprompter hood with boot. Slide the dual sided riser into the directional channel of the teleprompter base. Larger or taller cameras should insert the lower side facing glass, while smaller cameras should insert with higher side. P2P Interview/Interviewee Setup After both teleprompters have been setup and placed on tripods/pedestals, using one of the HDMI cables connect it to the camera on teleprompter 1 (interviewer) to the HDMI input port of monitor on teleprompter 2 (interviewee).
- Page 5 Monitor Ports Monitor Menu Settings Video Config Contrast (White Level) Brightness (Black Level) Tint (Chroma Hue) Chroma (Chroma Saturation) Sharpness (Detail) RGB Setup – Manually configure RGB Return System Config Menu Duration – Set duration of how long menu stays on screen Video Ratio –...
- Page 6 To make your teleprompter more portable, we packed it in a reusable, high-quality foam. The shape and size of the foam was designed to fit into Ikan’s PT-CASE-ELITE. Hard Cases only included in Travel Kit. ** DO NOT THROW AWAY FOAM CASE **...
- Page 7 Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company. • Damage caused by natural disaster, abnormal voltage, and environmental factors, etc. ©2020 Ikan International. All rights reserved. because we’re filmmakers too www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com...
Need help?
Do you have a question about the PT4200-P2P and is the answer not in the manual?
Questions and answers