and empty out the boiler using a basin or other such receptacle.
For a more thorough cleaning of the electronic sensor, we advise you to use a
glass of white non-distilled vinegar, or a mixture of water (70%) and Carico's
descaler (30%).
Never use concentrated, undiluted descaling products! You could
16
chemically damage the sensor's surface! Leave the product or the white
non-distilled vinegar to act on the sensor for at least 2 hours (Pict. 16).
Fasten the sensor back onto the machine, by turning clockwise.
Tighten without forcing.
IMPORTANT! The first time you use the appliance after descaling, remember
to discharge a little steam onto a dirty cloth. Repeat this several times, in order
to empty the steam circuit of all descaling product.
The appliance is now ready for use once again!
22
EN
Need help?
Do you have a question about the ULTRA TECH CLEAN MACHINE and is the answer not in the manual?
Questions and answers