Alemite 9911-HA Service Manual

Description

The major components of the high-pressure portable
pump assembly in the 9911-H model series consist of a(n):
• air-operated motor
• single-acting reciprocating pump tube with bung
adapter
• control valve assembly, z-swivel, and delivery hose
• cover with bung fitting
• handle assembly and bushing (model 9911-HA only)
• follower plate

Pump Assembly

The high-pressure (50:1 ratio) pump included with the
Assembly is designed to deliver a range of greases
[up to NLGI # 3] and operate directly from their original
containers.
Models 9911-HA, 9911-HB and 9911-HC
Each pump model includes a pump assembly that has a
tube length to accommodate different size containers. See
Figure 1.
NOTE: Model 9911-HA contains a handle
assembly and is designed to be transported
by hand.
Models 9911-HB and 9911-HC are designed
to be utilized with model 338958 two-wheel
hand truck (not included).

Specifications

IMPORTANT: For detailed information on
the pump tube (including specifications and
performance data) refer to SER 9911/9950.
For information on the motor, please refer to
SER 339413.
-A1
This document contains confidential information that is the property of Alemite Corporation
670794
and is not to be copied, used, or disclosed to others without express written permission.
Service Guide
High-Pressure Portable Pump
Alemite Corporation
PO Box 473515, Charlotte, North Carolina 28247-3515
www.alemite.com
©
Copyright 2000 by Alemite Corporation
Container Size
Pump Model
in kg
9911-HA 12.5
9911-HB 20
9911-HC 50
Figure 1 High-Pressure Portable Pump
Model 9911-H Series - Model 9911-HA Shown
9911-HA
9911-HB
9911-HC
Cover with Handle
and Bushing
Included
Not Included
SER 9911-HA
Revision (1-00)