Advertisement
How do you upgrade the firmware on
the Rigel Uni-Sim?
Items required:
• Uni-Sim with power supply
• PC with Bluetooth connectivity
• Uni-Sim firmware files (downloadable from
www.rigelmedical.com/downloads)
• DataTransfer.exe for file transfer (downloadable from
www.rigelmedical.com/downloads)
Note: Ensure the Uni-Sim is connect to mains supply before attempting the
upgrade.
Step by step process
1. Power on the Uni-Sim in upgrade mode (Hold 'U' whilst powering on the
unit)
2. Press F1 for Menu
3. Scroll down to Bluetooth Pairing and Press F2 to Accept.
4. Press F4 Config to configure the Bluetooth connection. Wait for the OK
message before proceeding.
5. Press F3 to search for your Bluetooth enabled PC.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rigel Uni-Sim
Summary of Contents for Rigel Uni-Sim
- Page 1 Note: Ensure the Uni-Sim is connect to mains supply before attempting the upgrade. Step by step process 1. Power on the Uni-Sim in upgrade mode (Hold ‘U’ whilst powering on the unit) 2. Press F1 for Menu 3. Scroll down to Bluetooth Pairing and Press F2 to Accept.
- Page 2 ‘Programming’. 13. Wait for the process to complete, then repeat the transfer for the Patient_Sim.hex and Rigel388.mhx files. 14. Once the transfer is complete, turn off the Uni-Sim and restart in normal mode. If you require more help, please contact us at https://www.seaward.com/gb/enquire/.
Need help?
Do you have a question about the Uni-Sim and is the answer not in the manual?
Questions and answers