Fiat Doblo Owner's Handbook Manual page 31

❒ move the seat belt to the side,
making sure that it is fully extended
and not twisted;
❒ lift lever A fig. 33 retaining the
backrest and fold the latter forwards.
When you lift the lever, you will see
a red band.
❒ pull the tape B fig. 33 behind the seat
backrests and fold the seats and the
backrests forwards.
1
5
4 3
2
2
1
3
33
34
Note On the split seats, there are
rubber bands on the lower edge of the
cushion so you can attach the folded
seat to the 2nd row rear seat head
restraint rods (see the plate on the seat
backrest fig. 33).
21)
REMOVING 3RD ROW
SEATS
Proceed as follows:
❒ remove the rear seat head restraints;
8
6
❒ remove the rolling curtain from its
7
housing;
4
❒ move the seat belt to the side,
making sure that it is fully extended
and not twisted;
❒ lift lever A fig. 33 retaining the
backrest and fold the latter forwards.
F0V0407
When you lift the lever, you will see
a red band.
❒ pull the tape B fig. 33 behind the seat
backrests and fold the seats and the
backrests forwards;
❒ position the head restraint using the
openings under the cushion to insert
the rods;
❒ push the lever as indicated in fig. 35;
❒ remove the seat from the
F0V0408
attachments on the floor.
35
REPOSITIONING 3RD
ROW SEATS
Proceed as follows:
❒ attach the hooks to the floor fig. 36;
36
❒ push the lever as illustrated in fig.
35 and pull it to make sure that
the seat is still correctly secured;
❒ withdraw the head restraint under the
cushion;
F0V0206
F0V0207
27