Advertisement
CH5
Adjust the green brightness
CH6
Adjust the blue brightness
CH7
Adjust the red brightness
CH8
Adjust the green brightness
CH9
Adjust the blue brightness
CH10
Adjust the red brightness
CH11
Adjust the green brightness
CH12
Adjust the blue brightness
CH13
Adjust the red brightness
CH14
Adjust the green brightness
CH15
Adjust the blue brightness
Working mode Options
Stand-alone Mode
Stand-alone: You can choose between Auto, Manual mode, Audio mode. Use the MENU, UP, DOWN and ENTER buttons to
select the desired mode.
Stand-alone master slave
Connecting several units together without a DMX controller
Setting the master unit
1. Press the menu button to select the desired mode, auto, sound, manual RGB
2. Press enter to confirm
Setting the slave units
1. Press the menu button until A*** is displayed
2. Use the up / down buttons to select A001
3. Press the enter button to confirm
4. All slave units must be set to A001
Please note only one unit must be set as a master
The slave units will follow the controls from the master unit
The foot pedal can be connected to the master unit to control all attached units
Light
1
Master
Using a DMX controller
Each unit uses 15 DMX channels
To control all units the same the DMX value must be set the same on all units example A001
To control units individually each unit must have its own dmx start address and each address must be at least 15 channels apart
No DMX address values must cross
Example unit 1 set to A001 unit 2 set to A016 etc each 15 channels apart
Using ob-3 mode
To select ob-3 mode
1. Press the menu button until ob-3 is displayed
2. Press enter to confirm
This is designed to use a basic 3 channel DMX controller and will only give control of the RGB of all par cans
Individual control of each can is not available nor are any of the built in programs.
Light
Power line
2
DMX line
A001
0-255
The first Green LED 0-100%
0-255
The first Blue LED 0-100%
0-255
The second Red LED 0-100%
0-255
The second Green LED 0-100%
0-255
The second Blue LED 0-100%
0-255
The Third Red LED 0-100%
0-255
The Third Green LED 0-100%
0-255
The Third Blue LED 0-100%
0-255
The Forth Red LED 0-100%
0-255
The Forth Green LED 0-100%
0-255
The Forth Blue LED 0-100%
Light
3
A001
Remember
to connect
Power line
AC Power
100~240VA
C 50/60Hz
Advertisement
