Advertisement
Foot switch
The foot switch has 2 pedals
The left pedal is blackout / on
Pressing the left pedal once will blackout the unit and all par cans will go off
Pressing the left pedal once again the unit will light and return to the position the unit was in before black out was pressed
In blackout mode the display will show
Using the right hand foot pedal (programs)
By pressing the program pedal the unit will step through the built in options
Auto programs 1-12-and Auto programs ALL. The digital display will read "APon->AP01->AP02->AP03->AP04->AP05->AP06-
>AP07->AP08->AP09->AP10->AP11->AP12->ALL") as you step through the selection.
You also can step on the "PROGRAMS" footplate again to select into R->G->B->RG->GB->RB->RGB-> modes
Use the MENU button to select the mode required
Once you have made a selection then press ENTER to confirm.
Function introduction
DMX512 mode: To receive DMX512 controller and the slave data.
Auto mode: There are 12 modes under this the auto mode, from AP01 to AP12, on every mode you can set the running speed.
Manual mode: Direct R G B control of colour and strobe speed can be manually set under this mode. The display will show r-00-r-
08 as you increase the value the LED brightness increase and change, The display will show g-00 - g-08 as you increase the value
the LED brightness increase and change, The display will show b-00 - b-08 as you increase the value the LED brightness increase
and change, F-00-F-08 is the Strobe Speed option and as you increase the value the Strobe speed will increase and change.
Audio mode: Under this mode, please adjust the Audio Sensitivity control knob on the rear panel to a suitable position,
meanwhile, there are 4 modes, from SP00 to SP03, as you increase the value the sound mode will increase and change.
Use the MENU button to select the mode required
Once you have made a selection then press ENTER to confirm.
Foot Switch mode: There are 20 modes that can be selected. AP01—AP12 is the internal auto program, ALL means these 12
internal programs running constantly.
DMX Channels
Channels
Function
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
CH1
Mode 7
Mode 8
Mode 9
Mode 10
Mode 11
Mode 12
Mode 13
Mode 14
CH2
Dimmer 0-100%
CH3
Strobe speed / chase speed
CH4
Adjust the red brightness
Note to operate Ch1 Ch3 must have a speed value set
DMX512
Description
0-9
RGB Color adjustment
10-29
Internal program running 1
30-49
Internal program running 2
50-69
Internal program running 3
70-89
Internal program running 4
90-109
Internal program running 5
110-129
Internal program running 6
130-149
Internal program running 7
150-169
Internal program running 8
170-189
Internal program running 9
190-209
Internal program running 10
210-229
Internal program running 11
230-249
Internal program running 12
250-255
4 kinds of Audio mode Options
0-255
Rgb brightness 0-100%
0-15
No-Strobe
16-255
Strobe or Running speed choose
0-255
The first Red LED 0-100%
Advertisement
