Zero Breeze MARK 2 Series User Manual

Zero Breeze MARK 2 Series User Manual

Advertisement

Model: Z20
Rated Voltage : 24V DC
Cooling Capacity : 650W
Cooling Rated Input : 240W
Refrigerant : R134A
Video Tutorial
Visit our official website to watch a video tutorial at www.zerobreeze.com
Warning: Before using this product, please read this manual carefully and keep it for future reference.
The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.
Sound Level : 52dB (A)
Climate Type: T1
Moisture Protection: IPX4
Carton Size: 23.6"Lx12.6"H/60x32x51cm
Net Weight: 16.5Lbs
MARK 2
Mark 2/Mark 2 Plus/Mark 2 PE
User Manual
V1.0
SERIES
www.zerobreeze.com

Advertisement

Table of Contents
loading

Summary of Contents for Zero Breeze MARK 2 Series

  • Page 1 MARK 2 SERIES Mark 2/Mark 2 Plus/Mark 2 PE User Manual Model: Z20 Sound Level : 52dB (A) Rated Voltage : 24V DC Climate Type: T1 Cooling Capacity : 650W Moisture Protection: IPX4 V1.0 Cooling Rated Input : 240W Carton Size: 23.6"Lx12.6"H/60x32x51cm Refrigerant : R134A Net Weight: 16.5Lbs Video Tutorial...
  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS •Do not mix old and new batteries. •Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries. Read This Manual To prevent injury to the user or other people and property damage, the following instructions must be followed. Inside you’ll find many helpful hints on how to use and maintain your air conditioner properly.
  • Page 3 GETTING TO KNOW THE MARK 2 CONTROL PANEL&REMOTE CONTROL PANEL The Mark2 is equipped with a new 24V high-performance compressor, and the outlet temperature can be lower than Power Button the ambient temperature of 28℉ in 10 minutes. The new dual-hose exhaust system improves space cooling speed by •When power on, press once to turn on, then press to turn off.
  • Page 4 Air conditioning power interface Mark 2 power adapter Home AC 100~240V(50Hz/60Hz) Air conditioner status light is red *Use the official adapter provided by Zero Breeze. Do not use a third-party adapter. Tutorial Battery Operation. Disconnect battery instructions Power off the battery...
  • Page 5 Full *Zero Breeze will not be held responsible for any consequences caused by charging with chargers not provided by Zero Breeze. *When the battery level indicators are all on, it means that the battery is fully charged.
  • Page 6: Use Environment

    PLACED IN A TENT ACCESSORY CONNECTION Exhaust hose connection instructions Conventional tent / tent with air conditioning interface Suggestions: •Pay attention to tent insulation. If the tent is poorly insulated, cover the tent with an insulated mat. •Pay attention to the tightness of the tent. For tents with vents, close or cover the vents. •Pay attention to shade the tent, it is recommended to use it in the shade.
  • Page 7 This accessory can be used in some environments, such as the cab, where it is not convenient to place the Mark 2 for This is only included in Zero Breeze Plus and Zero Breeze PE series.
  • Page 8: Air Filter Cleaning

    AIR FILTER CLEANING MALFUNCTION DIAGNOSIS Trouble Shooting Tips Symptom Possible Cause Solution E0 Error Code. Communication failure between driver Contact the consumer service. board and control board. E1 Error Code Temperature sensor error. Contact the consumer service. The air conditioner doesn’t work at Set the working mode to COOL or STRONG mode.

This manual is also suitable for:

Mark 2Mark 2 plusMark 2 peZ20

Table of Contents