12 MI456 Minititrator for Wine Analysis
pH Calibration Messages
This screen appears each time the meter enters pump or
pH calibration mode by pressing the CAL button.
This screen appears when the pH calibration is started by
pressing the pH button. Pressing again pH or the CAL button,
the pH calibration is aborted and the instrument returns to the
main screen.
This prompt appears for a few seconds before returning to the
main screen, when the pH calibration is done.
The "WRONG" " " / "WRONG" "
appear when the buffer solution is not correct or when the
probe is wrong. Clean the electrode by following the Cleaning
Procedure or check the quality of the buffer in order to continue
the pH calibration.
Press the CAL or pH button to leave pH calibration mode.
" tags alternatively blinking