LG LW1517IVSM Owner's Manual page 15

4
Before installing the front grille, fold out the
vent control lever located to the left
of the control panel, as shown below.
5
Connect the wire harness before
assembling the front grille.
6
Attach the front grille to the cabinet by
inserting the tabs on the grille into the
slots on the front top of the cabinet.
Push the grille in until it snaps into place.
NOTE
● Guide the lever carefully through the grille
as you push it in.
7
Open and remove the inlet grille from the
product.
Secure the front grille assembly with 2 type
A screws. Assemble the inlet grille to the front
grille again.
8
H
Screw
(Type A)
Inlet Grille
INSTALLATION
After the air conditioner is installed,
measure the curtain panel on each side
and cut the adhesive-backed heatproof
foam to fit each panel. The size of the
panels may differ. Remove the backing
from the heatproof foam and attach the
foam to the curtain panels.
Adhesive Backed
W1
W2
W1
Heatproof Foam
NOTE
Heatproof foam improves the cooling
●
capability of the air conditioner.
● See the Electrical Data section for
information on attaching the power cord
to an electrical outlet.
15 EN
W2
W W
H H
H