Table of Contents
Advertisement
Magtrol Model 3411 Torque Display
Command Code
UPD
WHOST,
XXXXXXXXXXXXXXX
AUTH
Function
Saves all LAN settings to non-
volatile memory and activates
them.
Save new local host name
to non-volatile memory and
activate new host name
Resets web interface
username password to admin/
admin
33
Chapter 6 – Mag.NET Commands
Explanation
To disable DHCP, the static ip,
gateway, and netmask commands
must have been given prior to sending
"UPD". If DHCP is already disabled,
"UPD" may be used to change a single
static network setting, i.e. only the
netmask, or only the gateway. Contact
your network administrator for details.
xxxxxxxxxxxxxxx:
String of up to 15 characters.
Must start with letter (A-Z)
May contain letters, numbers (0-9), or
dashes ("-")
Only available through USB Interface.
Advertisement
Table of Contents
