Table of Contents
Advertisement
Magtrol Model 3411 Torque Display
TORQUE SCALE
PULSE PER REV
DISPLAY UNITS
POWER UNITS
SYSTEM SETUP
TARE
RESET TARE
Button
Use to enter the rated torque scale of the attached transducer.
When pressed the display will change to read XX.XX N∙m / 5V,
where X is a digit. The blinking digit signifies the position of the
cursor. The arrow keys can be used to change the number. The
torque scale must be within the following range,
0.01 < x < 1.0 ∙ 10
Use to enter your encoders pulses per revolution. When pressed
the display will change to the XXXX format. The valid range you
can enter is from 1 to 100,000.
Use to change the units that the torque is displayed in. Use the
UP/DOWN arrow keys to scroll through the possible selections.
Be aware that due to the mathematical conversions involved,
changing units may result in the display reading zero or -OL -.
When -OL- is displayed, the reading contains more digits than
there is room for on the display. The possible selections include:
• oz·in
• oz·ft
• lb·in
• lb·ft
• g·cm
• kg·cm
• mN·m
• cN·m
• N·m
• daN·m
Use to change the units that the power reading is displayed in.
Use the arrow keys to scroll through the possible selections.
Be aware that due to the mathematical conversions involved,
changing units my result in the display reading zero or -OL -.
When -OL- is displayed, the reading contains more digits than
there is room for on the display. The possible selections include:
• hp
• W
• kW
Use to change or view the current system setup information. Use
the UP/DOWN arrow keys to scroll through the selection of setup
options. Press ENTER to select the displayed option. To exit
the setup menu select the RETURN option. The possible setup
options include:
• BITE
• USER SETUP
• STATIC IP SET
• DHCP ADDRESS VIEW
• FILTER SETUP
• CONTRAST
• SPEED BNC OUTPUT
• TM INVERT
• RETURN
When pressed takes the currently inputted torque reading and
uses it as an offset value. The 3411 torque reading will now
display 0.0 when the torque value read is the same as when the
TARE button was pressed.
Resets the TARE value to the original calibrated value.
Function
6
7
Chapter 2 – Controls
Advertisement
Table of Contents
