Localisation After Reset; Reset (Flashmenu) - Sharp SL-C750 Manual

///TRIsoft OHG

Localisation after reset

The Zaurus will start in Japanese after a hard-reset. The last status would be restored in
a flash, if there were a backup on a memory card.
The data would be lost, if there were no backup. But a "Localisation-Backup" can be
downloaded from our website http://www.trisoft.de and copied onto a memory card.
A recent backup must simply be read back via "Restore". The difficulty lies in the
recognition of the correct icons to click, wherefore a step-by-step manual with pictures is
following:

Reset (Flashmenu)

To reach the flash menu, the following steps are necessary:
•
Turn off the Zaurus, pull out the USB cable or other power supplies.
•
Unlock the battery compartment and take out the battery.
•
Wait for approx. 5 seconds.
•
Reinsert the battery, close the cover and turn the switch back to "Betrieb".
•
Connect USB cable or power supply and wait until the yellow charging LED
lights up.
•
Hold the "OK" key on the keyboard and turn on the device with the button
"On/Off".
•
The flash menu appears in Japanese:
Page 16
SL-C750/760/860 Quickstart
SHARP SL-C750/760/860