Initialization Of Sound Velocities - AND AD-3255 Instruction Manual

Step 5. Input the Value of the Second Point.
Input the value of the second point
using the
Press the
display an updated sound velocity.
Press the
exit the calibration mode and perform
the measurement with this range.

4-3-5. Initialization of Sound Velocities

Press the
holding the
Release the
The 5920 [m/s] is set to the sound velocity after the initialization.
switch and
switch to store and to
switch again so as to
switch to turn on the main unit while pressing and
switch after turning off the main unit.
switch when the sound velocity is displayed.
－ 19 －
switch.
Updated velocity
or
Thickness