Gadget Labs WavePRO User Manual page 8

Below is a list of the files, and where they are installed (*** = the
n
particular WavePRO product number):
Wave/*** Control Panel à
Wave/*** Library à
Wave/*** ASIO à Folder you selected
Wave/*** OMS Driver à Folder you selected
README 1ST à Folder you selected
Setting up the Audio ASIO driver
After the software is installed, for each application you wish to use
with the Wave/824, you will need to copy the Wave824 ASIO file into
that application's ASIO Driver folder.
In other words, if you don't copy the Wave824 ASIO driver into an
applications ASIO folder, you will not be able to use the Wave/824
with the application.
If you have multiple audio applications that support ASIO, you will, of
course, have multiple copies of the Wave824 ASIO file in your system.
Setting up the MIDI OMS driver
OMS Client Application setup: The OMS MIDI system has two parts,
n
the OMS client application and the hardware driver. If you have al-
ready installed your MIDI sequencing software (eg. Cubase VST or
Digital Performer), the OMS client application may already be in-
stalled. If not, you'll need to download the OMS client application
from Opcode's website, located at:
http://www.opcode.com/dl/oms/oms_mac.html
(as of this document, the latest version of OMS was 2.3.8).
After downloading OMS, run the installer to install the Open Music
System on your computer. The OMS installer will ask you to re-
boot, please do so.
After rebooting, you will need to copy the Wave/*** OMS Driver file
n
into the OMS Folder, located in your System folder.
Once the Wave/*** OMS Driver file is in the OMS Folder, run the OMS
n
Setup Application, located in the Opcode: OMS Applications folder
on your computer's hard disk.
Control Panels folder
Extensions folder
6