Table of Contents
Advertisement
Setting up Spark for WavePRO
Spark is a new digital audio editing program from TC Works. Here are
the steps to configure Spark for the WavePRO. Any settings not men-
tioned can remain in their default configurations.
run Spark and select the menu item 'Preferences'.
n
click the 'I/O' tab and select 'Wave 824 ASIO'.
n
- set 'Clock Source' to 'Internal'.
- set 'IO Sampling Frequency' to your choice; either 32000, 41000,
48000, or 96000.
- set 'Size of recording buffer' to 'default' (393216).
Once these settings are made hit the 'OK' button.
n
Selecting the input channels: from the bottom left side of the
n
'Transport' control you will see the Wave/*** I/O section with a
'Setup' box to the right.
NOTE: The 'Setup' box is inactive, and is not required for
WavePRO to work properly.
Above the 'Setup' box you will see an arrow with a drop down
n
menu that specifies the stereo input source. You can select ei-
ther 1+2, 3+4, 5+6, or 7+8 for your input source.
17
Advertisement
Table of Contents
