Table of Contents
Advertisement
IF YOU ARE INSTALLING THE WAVE/824 OR WAVE/496,
FOLLOW THE NEXT STEP.
(note: if you are installing the Wave/424, go to Step 6)
STEP
Ž
Connect one end of the Computer
Interface Cable to the WavePRO
PCI card connection at the back of
the computer.
IF YOU ARE INSTALLING THE WAVE/824, FOLLOW THE
NEXT STEPS 4 and 5
(note: if you are installing the Wave/496 or Wave/424, go to Step 6)
STEP
Connect the cord from the AC Power Cube to
•
the Patch Box
Connect the PCI card to the Patch Box
Connect the other end of the
Computer Interface Cable to the
back of the Patch Box.
For the Wave/824, you can
also connect MIDI cables to the
MIDI IN & OUT connections.
Plug the small connector on the end
of the cable from the Power Cube to
the Wave/824.
Make sure this connection is secure
since the Wave/824 must have power
to operate properly.
If you won't be using the Wave/824 in
an equipment rack, you should also
stick the rubber feet on the bottom
of the Patch Box.
4
Advertisement
Table of Contents
