Table of Contents
Advertisement
STEP
Connect the Power Cube to an AC outlet
•
STEP
INSTALLING THE SOFTWARE DRIVERS
'
After installing the WavePRO hardware, reconnect the computer's
n
power cord, turn on the power switch and boot your computer.
Once your Mac is booted up, insert the diskette labeled 'WavePRO
n
Macintosh Drivers'.
Note: If your Mac does not have a floppy disk drive, please surf to
our Internet Web site to download the drivers.
The URL address is:
http://www.gadgetlabs.com/support/downloads.htm
The software diskette includes unique Installer files for each
WavePRO product. For example, there is a file called, 'Wave/824
Macintosh Installer' and also one called, 'Wave/424 Macintosh In-
staller'.
The Installer files include software drivers that support both Audio
(the ASIO driver) and for MIDI (the OMS 'Open Music System' driver).
To start the driver installation, double-click the Installer icon that
n
corresponds to your WavePRO product. You will see the End User
License Agreement, please read through this before hitting the
Continue button.
After hitting Continue, the installer will prompt you for a location.
n
Select a location (remember where it was!), and hit the Install
button.
The Installer will now copy the necessary files onto your hard disk.
n
Connect the Power Cube to an AC power outlet.
This can be directly into a wall outlet or a power
strip.
When this power is on, the green light on the
front of the Wave/824 will turn on.
The Patch Box does not have a power on/off
switch and it's OK to leave it powered on or off
when not in use.
5
Advertisement
Table of Contents
