Transmitter Parts; Figure Gmw80 Series Transmitter Parts - Vaisala CARBOCAP GMW80 Series User Manual

2.1.1 Transmitter parts
1
2
3
4
5
6
7
Figure 1 GMW80 series transmitter parts
1 Opening tab
2 Screw terminals. The wiring information is marked on the mounting base next to the
terminals.
3 Barrier to prevent the cable from being routed below the GM10 measurement module.
The area to avoid is marked NO CABLES on the mounting base.
4 Orientation arrow. Should point up after mounting base has been installed.
5 Opening for cable when wiring from behind (recommended)
6 Place for cable tie (optional, for cable strain relief)
7 Breakaway tab for routing the cable from below
8 Locking screw. Supplied with the transmitter.
9 Breakaway tab for routing the cable from above
10 CO level indicator LEDs (on models with the letter A) or relay indicator LED (on models
2
with the letter S)
11 Display (on models with the letter D)
Chapter 2 – Product overview
8
9
10
11
9