Contents safety warnings ............4 unpacking ..............7 product overview ............8 main unit ................8 - top view ................8 - side view ................8 charging the unit ............9 Bluetooth® operation ..........10 disconnect the Bluetooth® ........10 general operation .............11 switching the unit on and off ........11 pause and resume playback ........11 adjusting the volume ..........11 skip the track ..............11...
safety warnings • Read all the instructions carefully before using the unit and keep them for future reference. • Retain the manual. If you pass the unit onto a third party make sure to include this manual. Damage • Please inspect the unit for damage after unpacking.
Page 5
Ventilation • To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents. • Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.
Page 6
Service • To reduce the risk of electric shock, do not remove screws. The unit does not contain any user- serviceable parts. Please leave all maintenance work to qualified personnel. • Do not open any fixed covers as this may expose dangerous voltages.
Thank you purchasing your new iWantit wireless speaker. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues.
product overview main unit top view side view STANDBY Button VOLUME DOWN/SKIP Button VOLUME UP/ SKIP Button PLAY/PAUSE/TALK Button DC-IN 5V 1A Socket AUX IN Socket BTB16_IB_160308.indd 8 30/03/2016 14:2...
charging the unit This Unit has a built-in rechargeable Lithium battery. • To charge the unit, open the flap then connect the USB cable to the DC-IN 5V 1A Socket on the side of the unit and plug into a powered USB socket e.g.
It will say “Powering on” and the blue indicator lights will flash quickly. The unit is now in pairing mode. “iWantit IPBTB16” will appear on the list of Bluetooth® devices select this. Type in the password “0000” if requested. It will say “Paired”...
general operation switching the unit on and off To turn on the unit, press and hold the STANDBY • button for 3 seconds. The unit will say “ Powering ON” and the blue indicator lights will flash. To turn off the unit, press and hold the STANDBY •...
receiving and ending calls When there is an incoming call, the unit will pause the playback and ring to alert. To answer a call, press the PLAY/PAUSE/TALK • Button. To end a call, press the PLAY/PAUSE/TALK • Button again. To reject a call, press and hold the PLAY/PAUSE/ •...
AUX IN operation Use a 3.5mm AUX IN cable (not included) to connect your audio device through the AUX IN socket at the rear of the unit. Use the controls on your auxiliary device to play music. You can only adjust the volume level from the unit or the Auxillary device independently, so you may need to adjust both.
hints and tips If a problem does occur, it may often be due to something very minor. The following table contains various tips. Problem Cause / Solution No Power • Make sure that the unit is fully charged. • Ensure that the unit is fully response in charged.
Model IPBTB16 Unit output power 2 x 3W (RMS) Bluetooth Bluetooth® 4.0 Battery life 10 hours (approx.) DC-IN 5V, 1A Dimensions Approx. 170(L) x 52(W) x 60(H) mm Weight 390g Features and specifications are subject to change without prior notice.
Page 16
DSG Retail Limited is under license. Other trademarks and trade names are those of their respective owners and all rights are acknowledged. DSG Retail Ltd. (co. no. 504877) 1 Portal Way, London, W3 6RS, UK IB-IPBTB16-160330V1 BTB16_IB_160308.indd 16 30/03/2016 14:2...
Need help?
Do you have a question about the IPBTB16 and is the answer not in the manual?
Questions and answers