Functions - Breville the Bambino Plus Instruction Book

Functions

FIRST USE
1. Remove the water tank and fill with potable +
water to the indicated MAX line. Replace
the water tank onto the machine.
2. Ensure that the drip tray is correctly
positioned on the machine.
3. Plug the power cord into the power outlet.
+
4. Press the 1 CUP, 2 CUP or STEAM buttons
to turn the machine on.
5. Press the 1 CUP button and the machine
will commence its first use cycle.
6. Once complete, the machine will go
into ready mode and all lights will be
illuminated.
NOTE
The first use cycle is to rinse the machine and
prime the heating system.
TURNING OFF MACHINE
+
To turn the machine off, press the 1 CUP and
STEAM button simultaneously.
+
FILLING THE WATER TANK
Lift the water tank from the machine. Remove the
2s
water tank lid and add potable water to the water
tank, filling to the MAX marking indicated.
2s
Replace the water tank onto the machine,
ensuring it is properly attached and sitting
flush against the back of the machine.
If the 1 CUP, 2 CUP and STEAM buttons
illuminate, the water tank has been correctly
attached.
The machine will detect when the water level is
low. The 1 CUP, 2 CUP and STEAM buttons will
not be illuminated.
When this occurs, add water to the water tank.
Once there is sufficient water, all buttons will be
OFF
illuminated and the machine can be used.
FILTER BASKETS
This machine includes dual wall 1 Cup and
OFF
2 Cup filter baskets.
+
MAX
+
1 CUP
OFF
2 CUP
9