Bissell PROHEAT PET ADVANCED 1799 Series User Manual page 13

Storing Your Machine
WARNING
To reduce the risk of fire, electric shock, or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1
Once your cleaning is complete, make sure
the water tank is emptied and rinsed out. Put the
machine away in a closet or basement for the
next use.
NOTE: Store cleaner in a protected, dry area.
Since this product uses water, it must not be
stored where there is a danger of freezing.
Freezing will damage internal components and
void the warranty.
Caring for Your Machine
A few simple steps can assure your machine is well maintained after your cleaning is complete.
1
Turn power OFF and unplug
the machine. Always wrap the
power cord and make sure the
hose is securely wrapped.
4
Nozzle and Brush Roll Cleaning
2
Make sure you rinse the
2-and-1 Tank an extra time
on the last rinse. Rinse under
and around the bladder as
well as the lint screen.
Insert the Nozzle Clean Out
Tool into the thin slot, on
the end of the nozzle that
touches the floor. Clean until
free of pet hair or debris.
Use the opposite side of the
tool to clean the Brush Rolls
by combing the bristles to
help loosen hair or debris.
Wipe the machine's exterior
with a soft cloth. Once your
carpet is dry, vacuum again
to remove any excess hair or
fuzz on your carpet.
3
Clean the flow indicator filter
after each use. Unscrew the
cap to lift the red rotor and
white filter. Rinse all parts
with water and return them
to the machine. Twist the cap
back on, but do not overtighten.
www.BISSELL.com
13 13