Table of Contents
Advertisement
③
Audio output level:
AES/EBU audio output.)
④
Input File Loader： If put a check mark on [Enabled] box, all the files in the directory that
is designated on the Load Directory window are automatically loaded in the material list
when the application is booted.
⑤
Control Mode: Selects Clip list mode or Playlist mode. The following selection menu
opens by clicking the right tab.
Single file mode--- The mode that only one selected clip can be played back.
Playlist mode--- You can playback plural clips continuously in this mode.
⑥
Set reference timing: Adjusts Gen-lock phase. For adjustment, move the slide bar or put
digits -511 to +511 in the window then click the [Apply] button.
⑦
Character Output:
ON--- Enables the character insertion.
Timecode--- Timecode can be displayed.
Status--- Deck status (REC, PLAY, STOP etc) can be displayed.
⑧
MJPEG interlace mode: Selects interlace mode when playback the Motion JPEG file.
The default mode is the [TOP], but there is a case that the ODD/EVEN relationship
becomes abnormal for some MJPEG files. In this case, you can select the other mode.
⑨
Audio monitor channel select： Selects channel pair (1/2, 3/4, 5/6, 7/8) for the playback
audio meter.
⑩
Variable audio mute: Enables audio mute in variable play back mode. Without check
mark, audio can be output even in the variable playback (JOG, Slow or Shuttle).
⑪
UDP Remote Enable: Put a check mark in the box if you use the Ethernet UDP remote
control.
⑫
GPI Cue Point: Designate the CUE-UP offset of the GPI interface (OPTION). The default
value is [00:00:00:00].
⑬
Repeat: Enables repeat (LOOP) playback.
⑭
Timecode out:
VITC, VITC2, LTC or Disable can be selected.
⑮
OK button: Sets the new settings.
⑯
Cancel button: Cancels the new settings.
This menu is not available. (This menu is for the model with
Determines whether the characters are inserted or not.
Selects time code output on the HD-SDI (RP-188 specification). The
24
Advertisement
Table of Contents
