Canon WUX500ST Quick Start Manual page 23

■ Install Facing in the Correct Direction
• The projector can be installed facing any direction, as shown
below. However, projection upward or downward may shorten the
useful life of the lamp. [Install settings] of the projector must also
be adjusted.
• For upward or downward projection, refer to instructions for
[Vertical projection] in the [Install settings] menu.
• Do not attempt to install the projector for upward or downward
projection by yourself. Always request installation by a qualified
technician or the Canon Customer Support Center.
10° 10°
Upward
projection:
Inclination of the
projector should
be no more than
10° from the
vertical axis.*
10°
10°
* Failure to do so may damage the lamp.
There are no options for installing the projector other than the ceiling attachment. (P35)
If installing the projector
on the floor or hanging
from the ceiling, the left /
right inclination of the
projector should be no
more than 10°.*
23
Before Installation
10° 10°
Downward
projection:
Inclination of the
projector should
be no more than
10° from the
vertical axis.*
Do not use the
projector standing
on its side.*