Changing A Password - American Megatrends Super Voyager LPX User Manual

Changing a Password

Select the Password icon from the Security section of the WinBIOS
Setup main menu. Enter the password and press <Enter>. The screen
does not display the characters entered. After the new password is
entered, retype the new password as prompted and press <Enter>.
If the password confirmation is incorrect, an error message appears. If
the new password is entered without error, press <Esc> to return to the
WinBIOS Main Menu. The password is stored in CMOS RAM after
WinBIOS completes. The next time the system boots, you are prompted
for the password if the password function is present and is enabled.
Remember the Password
Keep a record of the new password when the password is changed. If
you forget the password, remove the computer cover, set switch 1-2 (the
DIAG switch) to ON, power on the computer. AMIBIOS will erase the
password.
Chapter 6 AMIBIOS Setup
170