Chipset Setup - American Megatrends Titan II User Manual

Chipset Setup

The WINBIOS Setup options described in this section are selected by choosing the Chipset Setup icon from the
WINBIOS Setup main menu.
Base Memory Size
This option specifies the size of the base memory. The Optimal and Fail-Safe default settings for this option are
640KB.
VGA Palette Snooping
Set to Enabled if the computer has an ISA adapter card that requires palette snooping. The Optimal and Fail-Safe
default settings are Disabled.
PCI Master Latency Timer
Specifies the amount of time that a PCI master can be active in the system (in units of PCI clocks). For systems with
only one PCI master, this option should be set to the maximum 240 PCI clocks.For systems with many PCI/ISA
masters, this option should be set to a smaller value to make sure that all PCI devices can gain bus ownership as
necessary. The Optimal and Fail-Safe default settings are 240 PCI clocks.
Memory Hole Start Address
A allows creation of a hole of 1 MB size within the 16 MB main memory. It can be placed at any 1 MB boundary,
starting at the 2 MB boundary. Optimal and Fail-Safe Default settings are Disabled.
System Using Caching Controller
Set to Yes when a caching SCSI controller adapter card is used. The Optimal and Fail-Safe Default settings are No.
Titan-II PCI Pentium EISA Motherboard User's Guide
39