Select Screen Saver On Or Off; Select Angle Mark On Or Off - Kenwood DVF-S500 Instruction Manual

22
Select Screen Saver on
or off
1 During stop mode, press SET UP key on the re-
mote.
2 Press Cursor up/ dow n (5/ ∞) keys on the re-
mote to select the OTHERS SETUP, then press
the ENTER key to access the sub features
3 Press Cursor up/ dow n (5/ ∞) keys on the remote
to select SCR SAVER, then press the Cursor
right (3) key to access the sub features
4 Press Cursor up/ dow n (5/ ∞) keys on the remote
to select ON or OFF, then press the ENTER key.
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press Cursor up/ dow n (5/ ∞) keys on the remote
to select M AIN PAGE, then press the ENTER key.
7 Press Cursor up/ dow n (5/ ∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
%

Select ANGLE mark ON or OFF

1 During stop mode, press SET UP key on the re-
mote.
2 Press Cursor up/ dow n (5/ ∞) keys on the re-
mote to select the OTHERS SETUP, then press
the ENTER key to access the sub features
3 Press Cursor up/ dow n (5/ ∞) keys on the remote
to select ANGLE M ARK, then press the Cursor
right (3) key to access the sub features
4 Press Cursor up/ dow n (5/ ∞) keys on the remote
to select ON or OFF, then press the ENTER key.
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press Cursor up/ dow n (5/ ∞) keys on the remote
to select M AIN PAGE, then press the ENTER key.
7 Press Cursor up/ dow n (5/ ∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
Set Up functions
DVF-S500 (Y)
%