babymoov Yoo-Feel Instructions For Use Manual page 14

B. USING THE INTERFACE AND MENU
A. CONNECTION BETWEEN THE CAMERA AND THE RECEIVER
The connection process (pairing) links the receiver to the camera so that they can communicate without the risk of other
appliances (even other Yoo-Feel cameras) interfering with the receiver or receiving your signal.
1. Access the main menu
2. Select 'Camera'.
4. Press the
MENU MENU
'+' symbol.
Congratulations! Your camera is now connected!
To add other cameras (up to 4 cameras), repeat steps 3 to 4 for each camera, one at a time.
N.B. you can only connect YOO-FEEL cameras to the receiver. If connection fails, delete the camera and repeat steps 1 to 5.
Battery level
Signal level
Time
CONNECTING THE CAMERA TO THE RECEIVER
.
Camera Camera Add Camera Add Camera
Yoo-Feel BABY MONITOR • Instructions for use
Camera
number
Night light
Zoom VOX
3. Select
MENU MENU
'Add camera'.
5. Turn on the
camera and press
for 3 seconds.
Lullaby
STATUS
BAR
MAIN
MENU
Camera Camera
View Camera View Camera
Scan View Scan View
ON ON OFF OFF
Add Camera
Delete Camera Delete Camera
EN
15