Kathy Ireland PRO Series Owner's Manual page 7

3. Ceiling Fan Assembly
3.6
The Fan comes with Blue, Black and White Wires that
are 42" long .
Measure up approximately 6 to 9-inches above top of
Hanger Ball/4 .5" Downrod Assembly (Figure 5) .
Cut off excess Wires and strip back insulation 1/2-inch
from end of Wires .
3.7
Carefully turn the partially assembled Ceiling Fan over
and place it on the styrofoam for final preparation
(Figure 6) .
3.8
Remove the Shipping Spacers and the Spacer
Attachment Screws from the Motor before installation of
blade assemblies (Figure 7) .
Discard the Spacers and Spacer Screws .
(Continued)
Figure 7
PARTIALLY ASSEMBLED
CEILING FAN
Figure 6
SPACER ATTACHMENT SCREW
SHIPPING SPACER
Figure 7
Please contact 1-800-777-4440 for further assistance
7
6 to 9
INCHES
HANGER BALL/
DOWNROD
ASSEMBLY
STYROFOAM
luminancebrands.com
U.L. Model No.: 52-ANT